Just over a year ago, the DiecastSpace Magical Weekend of Cars rolled into the Swan and Dolphin Hotel at DisneyWorld in Orlando, Florida, and we were fortunate to have Jake and the crew from Tail Fins and Chrome at the event to capture some of the atmosphere and personalities at the convention.

The episode aired on RTV and TUFF TV on May 1st, but the Tail Fins crew has made the full episode available for those who missed it! Segments from the convention include interviews with me, die-cast author Mike Zarnock, die-cast designer Eric Tscherne, DCS Staffer Jason Bennett and female collector, Katerina. As an added bonus, the episode includes a great segment from the Hot Wheels room at the Peterson Automotive Museum.

The convention segments are sprinkled between some cool footage of a pretty impressive police car (1:1 scale!) collection, so make sure you watch the whole episode to see everything from the Magical Weekend!

Be sure to check out the Tail Fins and Chrome website to catch more full length episodes or to see if the show is available on cable TV in your area.

The next Magical Weekend of Cars will be rolling into Anaheim, CA in the Summer of 2012, but there are plenty of great events to attend in the meantime. Check out ToyCarConventions.com for a complete listing of all the DiecastSpace events nationwide.

The Amateur entries in the Customs Contest at the 2010 Magical Weekend of Cars contained a wide variety of style and creativity. Today’s amateurs are tomorrow’s pros, and each year the level of talent continues to rise.

The following slideshows feature entries from the Mild, Spicy and Wild classes. Which are your favorites? Share your thoughts in the comments section below.

+++ Amateur – Mild +++

+++ Amateur – Spicy +++

+++ Amateur – Wild +++

There were a lot of fantastic entries in the Customs Contest at the 2010 Magical Weekend of Cars in Orlando, Florida. This is the first post of many that will showcase all the great work these customizers have put into their entries. This slideshow features only diorama pieces along with the tremendous efforts submitted by the kids.

Stay tuned for more pictures featuring the customs from both the Amateur and Pro classes.

The 2010 Magical Weekend of Cars has come and gone, but not without many great memories of the good times had be all who attended. The weekend was also packed full of many great convention and souvenir cars to choose from.

Collectors who weren’t able to attend the Magical Weekend are in luck as limited quantities of several convention pieces have been made available in the DiecastSpace store on a first come, first served basis. This is definitely a prime opportunity to pick up some great pieces like the MiQ Willmott Dairy and the official Liberty Promotions Drag Bus, Dairy and Camaro.

Speaking of Liberty Promotions, the remaining alternate color convention bus and Rebel Run versions (submitted randomly into orders) are also available for purchase at LibertyPromotions.com.

Attendees of the 2010 Magical Weekend of Cars will need to act fast to get their hands on one of these official Magical Weekend Convoy Customs.

Paint and graphics were done by SDChopShop and packaging was completed by Jimmy “The Boxman” Chavez. The run is limited to just 20 pieces.

The 2010 Magical Weekend of Cars rolls into the Swan and Dolphin Hotel at Disney World in Orlando Florida from June 23trd thru the 27th. Visit ToyCarConventions.com for more information on tickets and accommodations.

There’s just about a week to go, until the start of the 2010 Magical Weekend of Cars in Orlando, Florida and things are ramping up to bring this event to a whole new level. This time around collectors will get to interact with whole new set of vendors like The Franklin Mint, BBR Models, Spark, Minichamps, LeMans Miniatures and Kyosho – and these new vendors are all in addition the traditional brands that sponsor and attend each DiecastSpace convention.

In addition to the new vendors, Hot Wheels Designer Wayne Scott has been added to the guest lineup which already includes the likes of Big Daddy Don Gartlits, Phil Rhielman, Eric Tscherne, Mike Zarnock, Lee Pearlman, Chris Walker and Bryan Pope. Eric Tscherne recently posted this little teaser of the artwork that he’s preparing for the show that features renditions of himself and Chip Foose done up Pixar Cars Movie style!

The general admission has also been expanded to 30,000 square feet to accommodate upwards of 18 full scale hot rods. Rumor has it that two of those cars will be creations from the popular TV show Overhaulin’.

While most add-on events have sold out, there are still tickets available for the Liberty Promotions Drag Bus Breakfast. General Admission tickets for $60 (with a convention car) or $25 (without a car) are still available until Friday, June 18th. Additional rooms have also been added to the convention room block and are available of a first-come first-served basis. Please visit the official convention page on ToyCarConventions.com for more details.

Attendees of the upcoming Magical Weekend of Cars in Orlando, Florida will have the opportunity to snag one of these fantastic limited edition VW Drag Buses from Pope Designs. The bus comes as part of the purchase of a ticket to the Pope Designs Experience event and is limited to just 100 pieces!

Click the image to see a larger version

Tickets to the DiecastSpace Magical Weekend of Cars are selling fast, so be sure to visit ToyCarConventions.com for the last information on events and accommodations.

Theres no doubt that MiQ Willmott’s 2010 Diecast Hall of Fame Dairy Delivery was a hit at the DiecastSpace Super Convention. It made its debut there in a limited edition flat black with two extra special pieces done up in purple appearing in the charity auction.

Attendees of the upcoming Magical Weekend of Cars will have a chance at this “MiQ approved” 2.0 version of the Dairy that will be done up in crimson red. Chances are also pretty good that an alternate color pair could appear in the charity auction once again! Stay tuned!

With the new year well underway, I wanted to focus on something that might be especially helpful to collectors in 2010. This year is ushering in the greatest number of diecast conventions in a long time with Diecastspace.com sponsoring the Super Convention this month in Las Vegas, The Magical Weekend of Cars in June in Orlando, FL and the first ever Canadian convention in September. Hot Wheels focused collectors will attend the Strauss Nationals in St. Louis MO. this April, the Strauss main convention in CA. in the fall and Summer Smash III coming this August in RI. There’s also JL Fest, Autofest, and the Gathering of Friends for Matchbox collectors in New Mexico. International collectors can look forward to Hot Wheels conventions in Japan, Brazil, and Mexico. Add on all the growing number of various other smaller events all around the U.S. (and the rest of the world) and collectors will have more choices than ever to experience a convention first hand.

And yet I am sure it is may be an intimidating task to actually go to one of these small, medium, or especially large events without trepidation or fear of not knowing how to plan ahead or what to do while you’re there. With that in mind, I wanted to share with you my DO’s and DON’Ts list of convention happenings based upon my 8 years of convention going experience. Some of these may seem simple enough that you would think everyone should know it already; but it can take just one thing that you didn’t think of to affect your good time.

There’s a lot to digest, so I’ll be breaking up this advice into a multi-part series. I hope there is something on this list will make even the seasoned convention-goer go “HMMMM” I never thought of that!

BEFORE YOU GET THERE TIPS

DO: PLAN, PLAN, and PLAN ahead.

DON’T: Wait until the last minute.

This applies not only to the individual events at a convention but to any outside events you may want to attend or transportation needed to get to those events. Popular convention events or even popular event times sell out quickly; you may be left out in the cold. This is especially true if you are going with others; it’s great to be at the same event together and not get split up. Also, if you are flying seriously consider renting a car if the venue the convention is at is off the beaten track like an airport hotel If you are going to travel or room with others, the cost will be greatly be deferred. Plus you may want to look up what restaurants/bars may be in the area, most hotels don’t have a great variety of cuisine or price ranges you may like. Once you get to the hotel, the front desk can tell you areas to avoid. I didn’t head the desk clerk’s warning once in Ohio and almost got mugged!

DO: Every event that interests you or you can afford to do

DON’T: Deny yourself or hesitate.

If it’s your first time going to any convention; events are a great way to meet people and feel part of the collective festive atmosphere. Don’t let anyone talk you out of something; see for yourself. Plus don’t forget the price to an event where the event is run for a charitable organization or usually the convention auction bids can be tax deductible!

If it’s not your first time going to a convention; continue to go to events you like rather than backing off since no two events will ever be alike from convention to convention. You may miss out on a great car you want.

This leads me too….

DO: Bring LOTS of CASH and in various denominations.

DON’T: Rely on an ATM.

Even though you more than likely can buy convention cars with a credit/debit card when you register at a convention; 99% of room to room vendors take only cash. Plus any raffles the convention holds; usually for some great stuff; or cars for charity cars are cash only. Going to the hotel ATM [and most hotels don’t have many] can get expensive with fees or quickly runs out of cash. More than likely, your bank is not in the area of the convention and the nearest ATM may be a long walk/drive away with a high fee [especially if the hotel is near the airport; you’re kind of isolated.]

I remember a couple of years ago; the hotel ATM ran out of cash by 1PM on a busy Saturday and the hotel wasn’t prepped to have it refilled until the next day; people were frantic! The hotel was off the beaten path and walking to an ATM wasn’t really an option.

DO: Ask for payment before you leave home from friends for cars you bring back

DON’T: feel bad about it.

Not asking for the cash up front will only cut into your funds while you’re there and make you have to either go to the ATM more often [and we already discussed those pitfalls] or go without. All the prices for the convention cars should be in your pre-received convention packet so you know how much to charge. Whether you add tax or a small profit is up to you. The price of things adds up quickly!

DO: Be realistic if you’re going to be flipping convention/event cars whether it’s back home or at the event.

DON’T: Think every convention/event car is a money maker.

Don’t think that just because a car is from a convention event that it will be a moneymaker if you try to flip it. Some cars aren’t worth the price of admission to an event. If you aren’t a flipper then you’ll be fine and collect the car because of you enjoyed your experience. If you are a flipper be forewarned…you may get burned. Plus there are many more people than just you trying to flip the same car. I don’t flip, I just buy for people back home but I have seen how people have triumphed with flipping and where they have crashed and burned. It’s not pretty.

DO: Bring a diecast price guide like Tomart’s or the very least Lee’s.

DON’T: Think everyone is honest in their valuations.

No matter what anyone selling a car tells you; just have the guide with you to get a good idea of its value. It will give you piece of mind.

DO: Bring good walking shoes!!! Especially the ladies!!!

DON’T: and you’ll be sorry!

You are on you feet from the minute you leave you hotel room in the morning to the minute you head hits the pillow at 1:30am that night, [yes rooms are open that late].

You will be standing in lines for events, walking the floors room to rooming, going to eat either inside/outside the hotel, even sightseeing if you plan to, it all goes back to planning.

DO: Pack accordingly.

DON’T: Overpack; especially if you are flying.

You won’t need to bring a lot of different clothes to a convention. The majority of the time you will see most people in T-Shirts, shorts, and jeans. [Check the future weather cast re jackets/coats]. You may want to bring a polo or buttoned down shirt [especially if it’s a cool diecast or automotive themed one] to wear to the dinner but otherwise don’t load up on clothes. Take it from a confirmed over-packer; you may not use half the stuff you bring. Also, don’t forget to pack your camera/video camera. You won’t regret it later. I’ve forgotten my camera already and I have regretted what I didn’t get a picture of to this day.

Plus, you’ll need the space for cars which brings me to…

DO: Pack a bag in your bag

DON’T: Bring small suitcases

My buddy Mike from NH taught me this trick back in 2001. I went to my first CA Strauss convention and got short on my luggage space. It was just after 9-11 and restriction abounded regarding size/shape of bags and I was scared to bring a really big suitcase, plus I under estimated what I would buy once I was there. If you are a first time conventioneer you will be tempted to buy a lot!!!!! I had to go to Wal-Mart and buy a small suitcase to accommodate what I bought. Most convention cars are in there own protecto paks and are bulky to pack in a suitcase and you don’t want to pack fragile blistercards or loose cars wrapped in toilet paper in a regular case for fear of damage.

Bring one large suitcase with a rolled up duffel bag inside. It won’t take up a lot of space and you won’t be charged for 2 suitcases when you fly out and if you don’t need it, back it goes rolled up. It’ll save you a lot of grief. Now this brings me too…..

DO: Bring a variety of Protecto Paks.

DON’T: Rely on vendors at the convention.

Many of the fragile treasures you buy may not have protectos and can’t be packed by themselves. Some older blisters don’t fit into newer protectos so plan accordingly. I have found that the older full front protectos are great for a carrying a couple of cars in baggies and header cards [like ROAKs]! Protecto pak vendors may not be there or run out of popular sizes early. Most people can sell you a few but its better to prepare beforehand.

Think about bringing a pair of scissors [in your checked bag only please] and a couple of sheets of bubble wrap for cars in acrylic case; DOLLAR TREE stores offer small rolls that work great. My buddy Bryan has shown me that blue painters tape is a better alternative to any other tape in wrapping cars up since it is designed to come off easily from what it is stuck too without damaging the car, plus its strong while its in use. But this brings me too….

DO: Invest in a HOT-CASE.

DON’T: Think it won’t help.

This is not a shameless plug for HOT-CASES but an actual testimonial. They help you out a lot! The 24 cars carry case for loose cars is great to carry around if you plan to buy loose cars for it protects them as you go rooming. Believe me, toilet paper, tissue, or paper towel wrapping quickly shred or unravel and plastic shopping bags get banged up and torn in elevators and doorways faster than you think. The carry case fits into any carry on or checked bag. Invest in an actual HOT CASE box and carry bag for that HOT CASE. It fits into any airplane overhead compartment or under the airline seat in front of you and can hold a lot of convention cars. You can carry it on the plane as a carry-on. I usually have my backpack and the HOT CASE bag as carry-ons or the case will fit flat into most 30-32” suitcases.

DO: Invest in a good, compact, multiple bulb LED flashlight.

DON’T: Think it won’t help.

Again a learned tip from my NJ collector buddies Kenny and Carl. A nice, compact LED flashlight with multiple bulbs can assist greatly in determining the condition of loose cars especially REDLINES!!! Hotel room lighting is awful and don’t rely on vendors to bring a good light either. First ask permission to examine the car you are looking at, find a shadowed part of the room [or even hunch over with the car in you palm], and shine the flashlight over every nook and cranny of that car because every flaw, toning, chip, etc., etc., will immediately pop out. It can save you the annoyance of realizing later you bought a dud.

DO: Create a floor list to write down what rooms you’ve been in or where contacts are staying.

DON’T: Rely on your memory.

Simply put; it gets overwhelming. Even in a small convention, you will never remember all the rooms you have been in, want to go back to, or have no need to see again.

I’ll give a great example. Three years ago the Strauss west coast convention was held in Garden Grove CA in a hotel that had two towers. The North tower was where the official convention room block [cheaper rooms] were which stretched from between floors 4 thru 8. There were a lot of seller’s rooms on floors 3 and 9 as well as a smattering of rooms on higher floors. So you figure 7 floors [3 thru 9] with approximately 20 [conservatively] rooms open on each floor; that makes 140 rooms just in the North Tower. Plus the South towers had at least 60 rooms open as well so add those together you get 200 rooms of Hot Wheels. Unless you have a documented photographic memory; you won’t remember everything/everyone you saw/met and where it/they were! Some conventions now give you a small pad with your welcome package to help you navigate the hotel; but I have attached a floor sheet spreadsheet [at the end of this article] that really works. My wife came up with it in 2002 in Irvine CA after she couldn’t stand walking into the same room over and over again and hear me and my buddy say “Oh we’ve seen this before, nothing here”. Plus I have tinkered with it over the years. Use it, learn it, live it, know it, it works! It’s best to 3-hole punch the floor sheets I have provided and put them in a binder. The binder will give you a strong base to write on, those little pads won’t.

Well, that’s it for now. Like I said, its a lot to digest, but I hope you’ve enjoyed them so far. Join me next time in Part 2 where I’ll reveal all my DO and DON’T tips for after you arrive at the convention.

Got a tip of your own to add? I encourage you to share them wit the rest of the readers via the comments section below.

Download the Floor Sheet file here [Microsoft Excel Format]