• Advertise Here

Diecast Stories: Convention Do’s and Don’ts, Part 2

diecast_stories_logoIn Part 2 of my series on “Do’s & Don’ts” for convention goers I’ll cover all the things to consider after you arrive at the event and things are underway. Be sure to check out Part 1 of this series if you haven’t done so yet. You’ll find additional tips there to utilize before you even leave your house for the convention. And with that, enjoy Part 2!

AFTER YOU GET THERE TIPS

DO: Always be respectful when walking into someone’s room.

DON’T: be rude.

Even though people open their rooms up for room to room shopping; you are still entering someone else’s private space. Always say “Hi” or “How’s it going?” even if you don’t know the seller. It sets the mood right off that you are going to be respectful of the cars in the room. When leaving always give them a friendly parting phrase like “Take it easy.” Or “Have a good one”; even if you didn’t buy anything; because you never know if you may need to go back to get a car from that room. A little goodbye gesture may go a long way the next time you come around.

DO: Buy it if you like it and the price is good

DON’T: Deny yourself or hesitate and say you’ll think about it or come back…it won’t be there!!!

This is probably my first and foremost tip for anyone, newbie or experienced conventioneer, that is you see a car you want, like, and the price is good, don’t hesitate to buy it because if you hold off, someone else will grab it! Think about it; at any given event there are anywhere from 250 to 1000 people attending, don’t think no one else may want that car no matter how offbeat it may be and especially if you have been looking for it for a long time. Don’t use the excuse that “I just got here and want to look around” or “I need to get money, I’ll be back”.

If you are with a buddy, have him hold onto it while you get your cash or bum it from him if he can afford it. Then go back to your room and quickly settle up. That one find may make your whole trip do let it slip away!

DO: Zero in on a car you like

DON’T: Hesitate

This is a tip I have used for a long while and it works well. If you are room to rooming and you see a car your may like but aren’t sure and there are still other things you want to see in the room, just pick up the car and either a] walk around with it in your hand while you shop, or b] tell the room’s owner that you are interested in that car and put in sight of him saying you want to look around more. Even if you don’t eventually buy the car it won’t go anywhere while you’re in the room. Don’t feel bad about this, you got there first. It sounds silly to have to tell a collector this but you’d be surprised how many people wouldn’t think about doing this.

DO: Try to get a better price

DON’T: be afraid to negotiate

Plain and simple, when room to rooming during the convention; no matter what time of day/point in the week of the convention it is; it can’t hurt to ask for a better price. What’s the worse a seller can do; say no? If you really have to have it you are going to buy it anyway but just ask; you may be surprised. But if you don’t want to buy it, don’t flip out if the seller doesn’t meet your price!!! Just say “OK, thanks”, put it down and leave. You may need to go back later. But….

DO: Be wary of un-priced cars

DON’T: be afraid to walk away if you don’t like the price.

If a seller hesitates too long on giving you a price on an un-priced car and you think they’re jerking you around, don’t buy it. You can always go back. A lot of times the seller isn’t in the room and their spouse, buddy, significant other is watching over, you probably won’t get the answer you are looking for on an un-priced car or offer. If the person in the room can’t contact the seller, ask when you can go back. Don’t get angry you can’t get what you want right then. Trust me, if you anger the seller’s wife, he won’t be selling you anything when you come back. I’ve seen it happen.

DO: Take full advantage of a hospitality room

DON’T: Think you’re abusing the privilege.

Some events like Summer Smash have a club sponsored hospitality room that is a great place to grab a soda, snack, food, coffee, or just to talk to people. The whole reason for the hospitality room is to make people feel welcome so don’t be afraid to go. This isn’t to say you should start making long distance phone calls from the room phone or air out your tired, yellow crusted toe-nailed feet; no one wants to see that no matter how friendly the group running the room.

This next tip may only apply to me and usually my roommates; you may feel differently.

DO: Hang a DO NOT DISTURB sign all day/night on your door

DON’T: Take chances if you have any misgivings

At a convention I don’t like the hotel staff coming into the room when I’m not there; especially after I have just spent a good deal of money on something. I don’t care that my room isn’t straightened up everyday so much as I do care something being taken or worse yet scratched or broken! Even if something is put in a drawer or piled in a corner I don’t need anyone thumbing through my stuff. I am sure most hotel staff don’t steal or aren’t reckless….BLAH, BLAH, BLAH…I don’t care. I always put the DO NOT DISTURB sign on the door all day and just ask for towels and other items when I see the staff or put the towels out in hall when I leave in the morning.

I have heard and worse yet SEEN experiences where hotel staff innocently moved things off the bed in someone’s room to change the linens or pick up trash and didn’t realize something valuable was in the bag/box they just moved and PLOP out it came and smashed onto the floor. Nuff said!

DO: Go up to go down.

DON’T: get locked out of the elevator.

What the heck does “GO UP TO GO DOWN MEAN”? It’s simple! There are times at the convention when it seems everyone needs the elevator; after the dinner when everyone wants to change clothes, afternoons when the hustle around the hotel is at its peak, or check in/check out day. “GO UP TO GO DOWN” simply means that if you are on a lower floor [from LOBBY all the way up to 2nd floor [could be mezzanines or ballroom floors in between], or the parking garage elevator, and you need to go up to higher floors and there are big crowds all vying for an elevator ride, sometimes it pays to take the down-going elevator 2 floors and then ride back up headed to your floor. You will be guaranteed a spot and won’t have to stand shoulder to shoulder in the elevator vestibule for a long time.

DO: Expect to be on lines

DON’T: get exasperated.

Lines are part of any convention. There are lines to get into most any event. If you PLAN ahead, they won’t be so much of a headache. There are events like BINGO, POKER, or UNO that is a required ticket event. If you have a ticket to this event at a set time, there is really no need to be first on line unless you are with a large group and want to sit together. Usually at a Poker game you are assigned a seat anyway. You won’t have to rush down to get on line first.

I would suggest you do get down early for a space at the front of the line for DINNER so you can find a good seat or enough seats for your group. AUTOGRAPH sessions are very popular and the line could be cut off before you get there. Even though it says autographs will be from 1:30pm to 2:30pm that is for the convention’s and signer’s benefit not yours. The convention wants to get the signers out by 2:30pm so the line may be cut at 2:10pm to insure the signers are done by 2:30pm. There may be another event happening in that room that needs to be set up or the signer has to be somewhere else.

You should get on line early to any MEET & GREET events because tables fill up quickly as do bar/food lines and because the best snacks are usually gone first and you will have to wait longer with no seat. This includes an RLC party especially! A 45 minute wait at the front of the line is better than being stuck 45 minutes in the back of the line. Additionally, if someone is giving a demonstration or lecture about something you paid to see, best seats go fast. As for the vending machine; there are proponents who say the best stuff is in the front, middle, or end of the machine. I usually see the best stuff mid-session thru the end.

The Sunday show is a tricky one to decide if you should go down early. There is no way to tell if any specific convention car will be sold out or limited to buy by the Sunday show. The staff usually doesn’t let on anything throughout the convention so if there is something you really need to get, I would get there early. I usually get up early on Sunday morning to be near the front of the line to insure I will get the extra cars I need for my buddies back home. I am leaving anyway that day and it doesn’t bother me to be up early, especially if the extra casting I need is a HW Drag Bus!

This by no means states you should get to an event after its scheduled start time. No one likes lateness and you may miss out on something good.

DO: Expect people to be holding places in line for their friends and letting said friends in the line when they show up!

DON’T: get annoyed at this.

I’ll let you know straight up that this happens all the time! I have done it and it has been done to me. You can’t be angry about it, it’s not worth it. Usually people ahead of you on a line with give you the courtesy of saying, “I’m holding a place for my buddy, wife, kid, etc. etc.” so when someone shows up you are not upset. This may not always be the case but if you are at an event where you have a ticket already; don’t sweat it.

The only time this becomes an issue is when the line if for a car that is limited in quantity; then the line is usually controlled by the even staff or even the people on line themselves and is monitored for cutters. Most regular convention goers understand these differences about line cutting as well.

If you are on a line by yourself and need to leave to go to the restroom, your room for forgotten cash, or get a drink/smoke just be honest and tell the person behind you that this is the case, they wont mind you coming back into line at all. If you don’t say anything they won’t know to let you back in line; they aren’t mind readers. Just don’t be gone too long; try to get back quickly.

DO: Talk to people you don’t know and get to know a little about them

DON’T: Be a stick in the mud.

When I went to the CA. Strauss convention in October 2001 I didn’t know a soul.

I didn’t know what to expect and I was a little intimidated. Now if you have ever met me you wouldn’t think I’d be saying that; people have told me I can make friends with a tree and the tree would talk back. So the first night I was in CA. there was a meet & greet with snacks and drinks etc. but I had gotten there a little late. It was outside around a small pool area and there didn’t appear to be anyplace to sit. But I noticed a guy sitting by himself on a table and asked if I could sit with him. Needless to say eight years later that guy is still one of my best collecting and real world friends. This has happened to me many times over. At the very least you can make a friend to hang out with at the convention or sit with at dinner or room to room together. No matter what size the convention it can seem like a big place if you just hang out by yourself. This person may not become your bosom buddy and lifelong chum but he may trade/sell you a great car. Sometimes that can make your whole trip!

Ask people you meet if they are on RLC, DCS, MCCH etc. etc. and what their handle is. You may find out you already know them without ever having met them.

DO: Be a little wary of convention t-shirt sizes

DON’T: Feel the squeeze.

Most convention t-shirts will shrink some. Check out the size before you buy, don’t wait until you get home or already rip it out of the bag, you make not be able to exchange. If you take an L, get an XL, if you’re an XL, get a 2x. Most convention t-shirts are pretty high quality and will last a long time if properly washed; you’ll want to wear it again and again so buy a bigger size. You’ll be happier in the long run. Plus most women’s-only convention shirt sizes will probably be too small for the woman in your life; trust me on this one! Just because it’s pink or yellow; it may not fit.

I am sure there are many others who have gone to conventions longer than me or just have some great tips I may have missed. I would love to hear from you via the comments below so I can add them to my list!! Knowledge is power!

Now go get registered for one of the many excellent conventions happening this year, and I hope to see you there!

Related Posts Plugin for WordPress, Blogger...

What did you think of this post?
6 Collectors have commented so far. Click here to join the discussion!

6 Responses to “ Diecast Stories: Convention Do’s and Don’ts, Part 2 ”

  1. [...] that’s it for now. Like I said, its a lot to digest, but I hope you’ve enjoyed them so far. Join me next time in Part 2 where I’ll reveal all my DO and DON’T tips for after you arrive at the [...]

  2. Great post, allot of useful info in Part 1 & 2.

    Thanks for taking the time to write.

    Stick

  3. When you refer to being polite in other peoples room keep in mind I do say excuse me when I sometimes pass gas.

    I know that was geared towards me. :0)

    Great job guys!

  4. Bryan; you dont always say “Excuse Me”; you usually just run away and leave me or someone else holding the proverbial bag!!!!
    And even an “Excuse Me” from you doesnt always excuse the scent left in your aftermath.

    Thanks Stick for your kind words!

  5. Hey Joe good stuff See you in St Louis. You leaving with Frank, Joe and me on Thursday

  6. [...] players wagered nearly $ 2 billion this one-game on the bingo masses that use online bingo news. pose a simple premise, " If we play the online bingo games revolution with 1 and some x bigger than ten, [...]

Discuss this post

You can use these XHTML tags: <a href="" title=""> <abbr title=""> <acronym title=""> <blockquote cite=""> <code> <em> <strong>